TekPack™ AK100

Material Specification

(Typical Properties)

Non load bearing.

Non-Structural Thermal Break, offering a cheap option where there is little load applied.

Availability

Thickness mm ( “ )	Width mm ( “ )	Length mm ( “ )
1.5 (0.059)	1000 (39)	2000 (78)
2 (0.079)	1000 (39)	2000 (78)
3 (0.118)	1000 (39)	2000 (78)
4 (0.157)	1000 (39)	2000 (78)
5 (0.197)	1000 (39)	2000 (78)
6 (0.236)	1000 (39)	2000 (78)
8 (0.314)	1000 (39)	2000 (78)
10 (0.393)	1000 (39)	2000 (78)
12 (0.472)	1000 (39)	2000 (78)
15 (0.59)	1000 (39)	2000 (78)
20 (0.787)	1000 (39)	2000 (78)
25 (1)	1000 (39)	2000 (78)

Applications

Non-Structural thermal break
Isolating different metals to avoid accelerated corrosion
Level battens and frames
Wedge’s for window and door units

Supply Chain Responsibilities

Thermal Modelling – Architect
Structural Evaluation – Structural Engineer
Cost Evaluation – QS
Installation – Contractor

Quotations

The below information is required for quotations

Pad dimensions
Thickness
Number and size of holes
Quantity
Delivery Address

Mechanical Properties	Unit	Value	Test Standard
Compressive Strength at 20°C (68°C)	MPa (PSI)	20 (2,900)
Physical Properties
Density	g/cm³ (lbs/ft³)	0.97 (61)
Water Absorption 24h 23°C (24h 73°F)	%	0.01	DIN 53495
Thermal Properties
Operating Temperature	°C (°F)	-40 +80 (-40 +176)
Coefficient of Linear Expansion //	k-1 x 10-4	2	DIN 53752
Thermal Conductivity*	W/m.K	0.41 (2.84)	DIN 52612
Flame Retardance		HB	UL94
Acoustic Properties
Velocity	m/s	2430
Impedance	Rayl/m²	2.33

*Manufacturers’ figures

RoHS Directive

Hazardous products listed in the EU-directive 2011/65/EU (ROHS-directive), §4 section 1, are not used as ingredients in this material.

Benefits

Asbestos free
Low heat conductivity
Excellent tolerances with respect to parallelism
Long life expectancy
Low water absorption
Good hydrocarbon stability
Good chemical stability
Excellent mechanical durability
Very good electrical properties

On and Off-Site Support

We are here to discuss your application and assist you in selecting the right thermal break materials to meet your project specification.

Disclaimer. These figures are typical values for the material and do not represent a product specification. Properties will vary depending on source of raw material, method of processing, physical from of product, direction of measurement etc.

Download Data Sheet