TekSlide™ AK400

Material Specification

(Typical Properties)

Low friction slide bearings to allow for movement caused by temperature change, resulting in the expansion and contraction of different materials.

Download Data Sheet

Mechanical Properties	Unit	Value	Test Standard
Compressive Strength at 200°C (392°F)	Kg/cm² (lbs/ft²)	>70 (143,371)
Physical Properties
Density*	g/cm³ (lbs/ft³)	2.13 (2.18)	ISO 13000-2
Water Absorption 24h 23°C (24h 73°F)	%	0.01	ASTMD621
Thermal Properties
Operating Temperature*	°C (°F)	-200 +260 (-328 +500)
Thermal Conductivity*	W/m.K (BTU/Hr/ft2/in/°F)	0.24 (1.66)	ASTMD621
Flammability*		V-0	UL94

*Manufacturers’ figures

RoHS Directive

Hazardous products listed in the EU-directive 2011/65/EU (ROHS-directive), §4 section 1, are not used as ingredients in this material.

Benefits

Asbestos free
Low heat conductivity
Excellent tolerances with respect to parallelism
Long life expectancy > 50 years (dependent on operating conditions)
Low water absorption
Good hydrocarbon stability
Good chemical stability
Excellent mechanical durability
Very good electrical properties
UL 94-V0

Availability

Thickness mm ( “ )	Width mm ( “ )	Length mm ( “ )
1.5 (0.059)	1200 (47)	1200 (47)
2 (0.079)	1200 (47)	1200 (47)
3 (0.118)	1200 (47)	1200 (47)
4 (0.157)	1200 (47)	1200 (47)
5 (0.197)	1200 (47)	1200 (47)
6 (0.236)	1200 (47)	1200 (47)
8 (0.314)	1200 (47)	1200 (47)
10 (0.393)	1200 (47)	1200 (47)
12 (0.472)	1200 (47)	1200 (47)
15 (0.59)	1200 (47)	1200 (47)
20 (0.787)	1200 (47)	1200 (47)
25 (1)	1200 (47)	1200 (47)

Applications

Pipelines
Heat exchangers
Concrete decks
Oil & water transportation
Storage tanks/plants
Buildings – multi-storey car parks, apartment blocks etc
Subsea pumping stations
Pedestrian walkways

Supply Chain Responsibilities

Thermal Modelling – Architect
Structural Evaluation – Structural Engineer
Cost Evaluation – QS
Installation – Contractor

Quotations

The below information is required for quotations

Pad dimensions
Thickness
Number and size of holes
Quantity
Delivery Address

We aim to deliver all orders within 5 working days however we are well versed with industry requirements and therefore will always turn these around in the shortest time possible. Please call us if you have an urgent requirement and we will arrange your order to be expedited.

On and Off-Site Support

We are here to discuss your application and assist you in selecting the right thermal break materials to meet your project specification.

Disclaimer. These figures are typical values for the material and do not represent a product specification. Properties will vary depending on source of raw material, method of processing, physical from of product, direction of measurement etc.

Download Data Sheet